WORK INSPECTION - POP/GYPSUM APPLICATION

WORK INSPECTION - POP/GYPSUM APPLICATION                                                                

POP Application

1 1st quality of POP material is used in work.
2 All walls are in plumb & in right angle.
4 All edges are sharp.
5 Room's dimensions are equal i.e.diogonals of room are equal.
6 Joint between beams & slab sofit are in right angle.
7 Joint between adjacent walls is in right angle.
8 No undulation is seen in pop work.
9 No cracks are visible in pop work.
10 Minimum thickness of POP punning to wall and slab is 10 mm.
11 Area for fan and light points is finished properly ( circular shape ).
12 Bottom line of POP punning is cut is straight line.
13 Floor area is cleaned after work is over.